Canon PIXMA TS9050 Wireless Printer Setup

Canon PIXMA TS9050 Wireless Printer Setup - Learn ho to set up Canon PIXMA TS9050 here and get the user manual, service manual also tutorial tips and tricks with 3Dprintermanual.

Canon PIXMA TS9050 Wireless Printer Setup

Using Printer Canon PIXMA TS9050 with Wireless Direct Setup. You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using Wireless Direct)

This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly.


Follow the user manual procedure below to use Wireless Direct.

1. Changing Printer's Settings
2. Changing Settings of a Device and Connecting It to the Printer
3. Printing/Scanning with Wireless Direct

This section also describes changing Wireless Direct to wireless LAN.
Changing Printer Setting to Use Wireless LAN

Preparing for PIXMA TS9050 Wireless Printer Setup, Change settings below to prepare for Wireless Direct.

Printer's LAN settings

• Changing Printer's Settings

Canon PIXMA TS9050 Settings of connections

• Changing Settings of a Device and Connecting It to the Printer

Canon TS 9050 Changing Printer's Settings

1. Make sure printer is turned on.
2. Select Setup on the HOME screen.
3. Select Settings.
4. Select Device settings.
5. Select LAN settings.
6. Select Wireless Direct.
7. Select Wireless Direct active/inactive.
8. Select ON. The confirmation screen asking if you display the password information appears.
9. Select Yes or No. The list of Wireless Direct settings is displayed. The device detects the printer by the identifier (SSID).
10. Select OK.

The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Changing Settings of a Device and Connecting It to the Printer Canon TS 9050
1. Turn on wireless communication on your device.
Enable "Wi-Fi" on your device's "Setting" menu.
For more on turning on wireless communication, see your device's instruction manual.
2. Select "DIRECT-X-TS9050series" ("X" represents alphanumeric characters) from list displayed on device.
3. Enter password.

Your device is connected to the printer.

• Check the password for the Wireless Direct. Check by one of the following methods.
• Display on the touch screen.

Canon TS 9050 Wireless LAN settings

• Print the network settings.
• Depending on the device you are using, entering the password is required to connect a device to the printer via wireless LAN. Enter the password specified for the printer.
• If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting to the printer, the printer displays a confirmation screen asking if you allow the device to connect to the printer.

Make sure the name on the touch screen is the same as that of your wireless communication
device and tap Yes.

Canon TS 9050 Printing/Scanning with Wireless Direct

Canon PIXMA TS9050 Wireless Setup Connect a device and the printer and start printing/scanning.

Changing Canon 9050 Printer Setting to Use Wireless LAN
Follow the procedure below to change the printer TS9050 setting to use wireless LAN.

1. Select Setup on the HOME screen. Using the Operation Panel
2. Select Settings.
3. Select Device settings.
4. Select LAN settings.
5. Select Wireless LAN.
6. Select WLAN active/inactive.
7. Select Active.

If you do not use the printer over wireless LAN, select Inactive.

Canon TS9050 Changing Wireless Direct Setting
Change the settings for the TS9050 Wireless Direct following the procedure below.

1. Make sure printer is turned on.
2. Select Setup on the HOME screen. Using the Operation Panel
3. Select Settings.
4. Select Device settings.
5. Select LAN settings.
6. Select Wireless Direct.
7. Select a setting item.

Tap A to display the confirmation screen. To update the identifier (SSID) and the password, tap Yes.
To check the security setting and the updated password, tap Details and tap Yes on the screen displayed next.

• To change the printer's name displayed on the Wi-Fi Direct compatible device

Tap B to display the printer's name (TS 9050/9010/9000series) displayed on a Wi-Fi Direct compatible device.
Follow the procedure below to change the name.

1. Tap touch screen.
2. Enter device name (up to 32 characters).
3. Tap OK to finish entering device name.
4. Tap OK to finish specifying device name.

• To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer

Tap C to display the confirmation screen. If you want the printer to display the screen to inform you a Wi-Fi direct compatible device is connecting to the printer, tap Yes.

• To prevent an unauthorized access, we recommend you should not change the setting from the default.
• To check the current Wireless setups

Tap D to display the confirmation screen. To check the current Wireless Direct settings, tap Yes.

• If you select Print details, you can print the network settings.

8. Press HOME button.
The HOME screen is displayed.

Advertisement