-->

3D Printer Manual, Tutorial, Settings, Guide, Specs, Service, Review

Epson WF 3620 Wireless Setup Guide

Advertisement

Epson WF 3620 Wireless Setup Guide

Epson WF 3620 Wireless Setup Guide - Boost productivity for your small office with the WorkForce WF-3620, a breakthrough all-in-one printer that gives you Performance Beyond Laser™. Powered by Epson's new PrecisionCore printing technology, the WF-3620 produces fast, print-shop-quality color prints and laser-sharp black and color text. Plus, save on ink; get up to 40 percent lower printing cost vs. color laser1. For added convenience, this wireless printer easily prints from tablets and smartphones2. Featuring auto 2-sided print/copy/scan/fax and a 2.7" color touchscreen, it’s also designed to be jam free3. This reliable performer touts a 250-sheet paper capacity, plus a rear tray for envelopes or specialty paper. this wireless setup for printer epson WF 3620 and Epson WF 3640

Epson WF 3620 Wireless Setup

Epson WF 3620 Wireless Setup

You can Epson WF 3620 Wireless Setup to communicate with your computer using a wireless router or access point.
The wireless router or access point can be connected to your computer over a wireless or wired network.
1 Epson product
2 Wireless router or access point
3 Computer with a wireless interface
4 Computer
5 Internet
6 Ethernet cable (used only for wired connection to the wireless router or access point
 
Epson WF 3620 Selecting Wireless Network Settings From the Control Panel
You can select or change wireless network settings using your WF 3620 control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software from the product CD or by downloading it. The installer program guides you
through network setup.
Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.
1. Press the home button, if necessary.
2. Press .
3. Select Wi-Fi Setup.
You see this screen:
4. Select Wi-Fi Setup Wizard.
  • If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this manual.
5. Select the name of your wireless network or enter the name manually.
  • To enter the wireless network name manually, select Other Networks, then select the Network (SSID) field. Use the displayed keypad to enter your network name.
6. Select the Password field, and enter your wireless password using the displayed keypad.
7. Press when you’re finished entering your password, then select Proceed.
8. Confirm the displayed network settings and select OK to save them.
  • If you need to change a setting, press the back button.
9. If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.)
10. Press the home button to return to the Home screen.

If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
 
Epson WF 3620 Wi-Fi Direct Mode Setup
You can set up Epson WF 3620 to communicate directly with your computer or another device without requiring a wireless router or access point.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device
Your Epson 3620 automatically selects one of these modes to communicate with your computer or device:
 
Epson WF 3620 Access point mode
If your Epson WF 3620 is not already connected to a wireless network, it enters access point mode and the product itself acts as the network access point for up to 4 devices. When operating in this mode, your Epson WF 3620 displays an AP connection symbol on the LCD screen.
 
Peer-to-peer mode
If your Epson WF 3620 Wireless Setup connected to a wireless network, it enters peer-to-peer mode and disconnects from any other networks. This also disables any other product features requiring access to the Internet. When operating in this mode, your product displays a Direct or D connection symbol on the LCD screen.
To disconnect a peer-to-peer mode connection, release the connection to your product from your computer or other device. Your product will reconnect to the previously used network.
 
WF 3620 Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point, here Epson WF 3620 User Manual Guide instructions:
1. Press the home button, if necessary.
2. Press .
3. Select Wi-Fi Setup. You see this screen:
4. Scroll down and select Wi-Fi Direct Setup.
5. Select Connection Setup.
6. Select Change Password, then select Yes.
  • If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.
7. Enter a Wi-Fi Direct password using the displayed keyboard.
  • Your password must be at least 8 and no more than 22 characters long.
8. Press when you’re finished entering your password.
  • You see this screen:
9. Scroll down to view the SSID (Wi-Fi network name) and password.
10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
11. Press the home button to return to the Home screen.

You see either an AP, D, or Direct connection symbol on the LCD screen and should be able to print directly to your product from your computer or device.
If the AP, D, or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.
 
Epson WF 3620 Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS).
To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.
 
Epson WF 3620 Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network, follow this user guide :
1. Press the home button, if necessary.
2. Press .
3. Select Wi-Fi Setup.
You see this screen:
4. Select Push Button Setup (WPS).
5. Follow the instructions on the LCD screen to complete WPS setup.
6. Press the home button to return to the Home screen when finished.
If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is
lit as shown.
 
Epson WF 3620 Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network, follow these WF 3620 tutorials
1. Press the home button, if necessary.
2. Select Setup.
You see this screen:
3. Select Network Status.
4. Select Wi-Fi/Network Status.
5. Select Print, then press one of the buttons to print the network status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have.
 
Changing or Updating Network Connections
See these sections to change or update how your product connects to a network
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
For more information on the Web Config utility see the Administrator's Guide.
1. Print a network status sheet.
2. Locate the IP Address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
 
Epson WF 3620 Changing a USB Connection to a Wi-Fi Connection
If you have already connected your product to your computer using a USB connection, you can change
to a Wi-Fi connection or add a Wi-Fi connection to print wirelessly.
1. Do one of the following:
  • If you want to use only a Wi-Fi connection, disconnect the USB cable from your product. With Windows, also uninstall your product software.
  • If you want to add a Wi-Fi connection in addition to a USB connection, leave the USB cable connected to your product.
2. Download your product software from the Epson website, or install it from the CD that came with
your product using the instructions on the Start Here sheet.
 
Epson WF 3620 Changing a Wi-Fi Connection to a Wired Network Connection
If you have already connected WF 3620 to your computer wirelessly, you can change to a wired network connection if necessary follw this Epson User Guide :
1. Disable your product's Wi-Fi features.
2. Connect one end of an Ethernet network cable to the product's LAN port.
3. Connect the other end to any available LAN port on your router or access point.
4. Download and install your product software from the Epson website, or install it from the CD that came with your product.
5. Follow the on-screen instructions to install the software.
6. When you see the Select Your Connection screen, select Wired network connection.
7. If you see a Select Setup Option screen, select Setup printer for the first time.
8. Continue following the rest of the on-screen instructions.
 
Epson WF 3620 Wireless Setup Connecting to a New Wi-Fi Router
If you change the wireless router you have been using on your network, you can update your product's
Wi-Fi connection to the new router.
1. Do one of the following:
  • Windows: Uninstall your product software.
  • OS X: Go to the next step.
2. Download your product software from the Epson website, or install it from the CD that came with
your product using the instructions on the Start Here sheet.
 
Epson WF 3620 Disabling Wi-Fi Features
You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection.
Before disabling Wi-Fi features, make a note of your product's SSID (network name) and password, and any network settings selected for the Epson Connect services you may use.
1. Press the home button, if necessary.
2. Press .
3. Select Wi-Fi Setup.
You see this screen
4. Scroll down and select Disable Wi-Fi.
5. Select Yes to disable Wi-Fi.

Related Product Epson WF 2650 Advertisement